接口 WebStatus


public interface WebStatus
Status code in web development.
从以下版本开始:
2.0.0.RELEASE
作者:
vorbote thills@vorbote.cn
  • 字段概要

    字段
    修饰符和类型
    字段
    说明
    static final int
    Status code (202) indicating that a request was accepted for processing, but was not completed.
    static final int
    Status code (502) indicating that the HTTP server received an invalid response from a server it consulted when acting as a proxy or gateway.
    static final int
    Status code (400) indicating the request sent by the client was syntactically incorrect.
    static final int
    Status code (409) indicating that the request could not be completed due to a conflict with the current state of the resource.
    static final int
    Status code (100) indicating the client can continue.
    static final int
    Status code (201) indicating the request succeeded and created a new resource on the server.
    static final int
    Status code (417) indicating that the server could not meet the expectation given in the Expect request header.
    static final int
    Status code (403) indicating the server understood the request but refused to fulfill it.
    static final int
    Status code (306) indicating that the resource reside temporarily under a different URI.
    static final int
    Status code (504) indicating that the server did not receive a timely response from the upstream server while acting as a gateway or proxy.
    static final int
    Status code (410) indicating that the resource is no longer available at the server and no forwarding address is known.
    static final int
    Status code (505) indicating that the server does not support or refuses to support the HTTP protocol version that was used in the request message.
    static final int
    Status code (500) indicating an error inside the HTTP server which prevented it from fulfilling the request.
    static final int
    Status code (411) indicating that the request cannot be handled without a defined Content-Length.
    static final int
    Status code (405) indicating that the method specified in the Request-Line is not allowed for the resource identified by the Request-URI.
    static final int
    Status code (301) indicating that the resource has permanently moved to a new location, and that future references should use a new URI with their requests.
    static final int
    Status code (302) indicating that the resource has temporarily moved to another location, but that future references should still use the original URI to access the resource.
    static final int
    Status code (300) indicating that the requested resource corresponds to any one of a set of representations, each with its own specific location.
    static final int
    Status code (204) indicating that the request succeeded but that there was no new information to return.
    static final int
    Status code (203) indicating that the meta information presented by the client did not originate from the server.
    static final int
    Status code (406) indicating that the resource identified by the request is only capable of generating response entities which have content characteristics not acceptable according to the accept headers sent in the request.
    static final int
    Status code (404) indicating that the requested resource is not available.
    static final int
    Status code (501) indicating the HTTP server does not support the functionality needed to fulfill the request.
    static final int
    Status code (304) indicating that a conditional GET operation found that the resource was available and not modified.
    static final int
    Status code (200) indicating the request succeeded normally.
    static final int
    Status code (206) indicating that the server has fulfilled the partial GET request for the resource.
    static final int
    Status code (402) reserved for future use.
    static final int
    Status code (412) indicating that the precondition given in one or more of the request-header fields evaluated to false when it was tested on the server.
    static final int
    Status code (407) indicating that the client MUST first authenticate itself with the proxy.
    static final int
    Status code (413) indicating that the server is refusing to process the request because the request entity is larger than the server is willing or able to process.
    static final int
    Status code (408) indicating that the client did not produce a request within the time that the server was prepared to wait.
    static final int
    Status code (414) indicating that the server is refusing to service the request because the Request-URI is longer than the server is willing to interpret.
    static final int
    Status code (416) indicating that the server cannot serve the requested byte range.
    static final int
    Status code (205) indicating that the agent SHOULD reset the document view which caused the request to be sent.
    static final int
    Status code (303) indicating that the response to the request can be found under a different URI.
    static final int
    Status code (503) indicating that the HTTP server is temporarily overloaded, and unable to handle the request.
    static final int
    Status code (101) indicating the server is switching protocols according to Upgrade header.
    static final int
    Status code (307) indicating that the requested resource resides temporarily under a different URI.
    static final int
    Status code (600) means that the request has timeout.
    static final int
    Status code (401) indicating that the request requires HTTP authentication.
    static final int
    Status code (415) indicating that the server is refusing to service the request because the entity of the request is in a format not supported by the requested resource for the requested method.
    static final int
    Status code (305) indicating that the requested resource MUST be accessed through the proxy given by the Location field.
  • 字段详细资料

    • CONTINUE

      static final int CONTINUE
      Status code (100) indicating the client can continue.
      另请参阅:
    • SWITCHING_PROTOCOLS

      static final int SWITCHING_PROTOCOLS
      Status code (101) indicating the server is switching protocols according to Upgrade header.
      另请参阅:
    • OK

      static final int OK
      Status code (200) indicating the request succeeded normally.
      另请参阅:
    • CREATED

      static final int CREATED
      Status code (201) indicating the request succeeded and created a new resource on the server.
      另请参阅:
    • ACCEPTED

      static final int ACCEPTED
      Status code (202) indicating that a request was accepted for processing, but was not completed.
      另请参阅:
    • NON_AUTHORITATIVE_INFORMATION

      static final int NON_AUTHORITATIVE_INFORMATION
      Status code (203) indicating that the meta information presented by the client did not originate from the server.
      另请参阅:
    • NO_CONTENT

      static final int NO_CONTENT
      Status code (204) indicating that the request succeeded but that there was no new information to return.
      另请参阅:
    • RESET_CONTENT

      static final int RESET_CONTENT
      Status code (205) indicating that the agent SHOULD reset the document view which caused the request to be sent.
      另请参阅:
    • PARTIAL_CONTENT

      static final int PARTIAL_CONTENT
      Status code (206) indicating that the server has fulfilled the partial GET request for the resource.
      另请参阅:
    • MULTIPLE_CHOICES

      static final int MULTIPLE_CHOICES
      Status code (300) indicating that the requested resource corresponds to any one of a set of representations, each with its own specific location.
      另请参阅:
    • MOVED_PERMANENTLY

      static final int MOVED_PERMANENTLY
      Status code (301) indicating that the resource has permanently moved to a new location, and that future references should use a new URI with their requests.
      另请参阅:
    • MOVED_TEMPORARILY

      static final int MOVED_TEMPORARILY
      Status code (302) indicating that the resource has temporarily moved to another location, but that future references should still use the original URI to access the resource. This definition is being retained for backwards compatibility. FOUND is now the preferred definition.
      另请参阅:
    • SEE_OTHER

      static final int SEE_OTHER
      Status code (303) indicating that the response to the request can be found under a different URI.
      另请参阅:
    • NOT_MODIFIED

      static final int NOT_MODIFIED
      Status code (304) indicating that a conditional GET operation found that the resource was available and not modified.
      另请参阅:
    • USE_PROXY

      static final int USE_PROXY
      Status code (305) indicating that the requested resource MUST be accessed through the proxy given by the Location field.
      另请参阅:
    • FOUND

      static final int FOUND
      Status code (306) indicating that the resource reside temporarily under a different URI. Since the redirection might be altered on occasion, the client should continue to use the Request-URI for future requests.(HTTP/1.1) To represent the status code (306), it is recommended to use this variable.
      另请参阅:
    • TEMPORARY_REDIRECT

      static final int TEMPORARY_REDIRECT
      Status code (307) indicating that the requested resource resides temporarily under a different URI. The temporary URI SHOULD be given by the Location field in the response.
      另请参阅:
    • BAD_REQUEST

      static final int BAD_REQUEST
      Status code (400) indicating the request sent by the client was syntactically incorrect.
      另请参阅:
    • UNAUTHORIZED

      static final int UNAUTHORIZED
      Status code (401) indicating that the request requires HTTP authentication.
      另请参阅:
    • PAYMENT_REQUIRED

      static final int PAYMENT_REQUIRED
      Status code (402) reserved for future use.
      另请参阅:
    • FORBIDDEN

      static final int FORBIDDEN
      Status code (403) indicating the server understood the request but refused to fulfill it.
      另请参阅:
    • NOT_FOUND

      static final int NOT_FOUND
      Status code (404) indicating that the requested resource is not available.
      另请参阅:
    • METHOD_NOT_ALLOWED

      static final int METHOD_NOT_ALLOWED
      Status code (405) indicating that the method specified in the Request-Line is not allowed for the resource identified by the Request-URI.
      另请参阅:
    • NOT_ACCEPTABLE

      static final int NOT_ACCEPTABLE
      Status code (406) indicating that the resource identified by the request is only capable of generating response entities which have content characteristics not acceptable according to the accept headers sent in the request.
      另请参阅:
    • PROXY_AUTHENTICATION_REQUIRED

      static final int PROXY_AUTHENTICATION_REQUIRED
      Status code (407) indicating that the client MUST first authenticate itself with the proxy.
      另请参阅:
    • REQUEST_TIMEOUT

      static final int REQUEST_TIMEOUT
      Status code (408) indicating that the client did not produce a request within the time that the server was prepared to wait.
      另请参阅:
    • CONFLICT

      static final int CONFLICT
      Status code (409) indicating that the request could not be completed due to a conflict with the current state of the resource.
      另请参阅:
    • GONE

      static final int GONE
      Status code (410) indicating that the resource is no longer available at the server and no forwarding address is known. This condition SHOULD be considered permanent.
      另请参阅:
    • LENGTH_REQUIRED

      static final int LENGTH_REQUIRED
      Status code (411) indicating that the request cannot be handled without a defined Content-Length.
      另请参阅:
    • PRECONDITION_FAILED

      static final int PRECONDITION_FAILED
      Status code (412) indicating that the precondition given in one or more of the request-header fields evaluated to false when it was tested on the server.
      另请参阅:
    • REQUEST_ENTITY_TOO_LARGE

      static final int REQUEST_ENTITY_TOO_LARGE
      Status code (413) indicating that the server is refusing to process the request because the request entity is larger than the server is willing or able to process.
      另请参阅:
    • REQUEST_URI_TOO_LONG

      static final int REQUEST_URI_TOO_LONG
      Status code (414) indicating that the server is refusing to service the request because the Request-URI is longer than the server is willing to interpret.
      另请参阅:
    • UNSUPPORTED_MEDIA_TYPE

      static final int UNSUPPORTED_MEDIA_TYPE
      Status code (415) indicating that the server is refusing to service the request because the entity of the request is in a format not supported by the requested resource for the requested method.
      另请参阅:
    • REQUESTED_RANGE_NOT_SATISFIABLE

      static final int REQUESTED_RANGE_NOT_SATISFIABLE
      Status code (416) indicating that the server cannot serve the requested byte range.
      另请参阅:
    • EXPECTATION_FAILED

      static final int EXPECTATION_FAILED
      Status code (417) indicating that the server could not meet the expectation given in the Expect request header.
      另请参阅:
    • INTERNAL_SERVER_ERROR

      static final int INTERNAL_SERVER_ERROR
      Status code (500) indicating an error inside the HTTP server which prevented it from fulfilling the request.
      另请参阅:
    • NOT_IMPLEMENTED

      static final int NOT_IMPLEMENTED
      Status code (501) indicating the HTTP server does not support the functionality needed to fulfill the request.
      另请参阅:
    • BAD_GATEWAY

      static final int BAD_GATEWAY
      Status code (502) indicating that the HTTP server received an invalid response from a server it consulted when acting as a proxy or gateway.
      另请参阅:
    • SERVICE_UNAVAILABLE

      static final int SERVICE_UNAVAILABLE
      Status code (503) indicating that the HTTP server is temporarily overloaded, and unable to handle the request.
      另请参阅:
    • GATEWAY_TIMEOUT

      static final int GATEWAY_TIMEOUT
      Status code (504) indicating that the server did not receive a timely response from the upstream server while acting as a gateway or proxy.
      另请参阅:
    • HTTP_VERSION_NOT_SUPPORTED

      static final int HTTP_VERSION_NOT_SUPPORTED
      Status code (505) indicating that the server does not support or refuses to support the HTTP protocol version that was used in the request message.
      另请参阅:
    • TIMEOUT

      static final int TIMEOUT
      Status code (600) means that the request has timeout.
      另请参阅: