PowerSource (bus-all 5.3.5 API)

All Known Implementing Classes:

AbstractPowerSource, FreeBsdPowerSource, LinuxPowerSource, MacPowerSource, SolarisPowerSource, WindowsPowerSource
```
public interface PowerSource
```
The Power Source is one or more batteries with some capacity, and some state of charge/discharge

Since:

JDK 1.8+

Version:

5.3.5

Author:

Kimi Liu

Nested Class Summary

Nested Classes
Modifier and Type Interface and Description

static class PowerSource.CapacityUnits
Units of Battery Capacity

Nested Classes
Modifier and Type	Interface and Description
`static class`	`PowerSource.CapacityUnits` Units of Battery Capacity

Method Summary

All Methods Instance Methods Abstract Methods Deprecated Methods
Modifier and Type	Method and Description
`double`	`getAmperage()` Amperage of the battery, in milliAmperes (mA).
`PowerSource.CapacityUnits`	`getCapacityUnits()` Reports =the units of `getCurrentCapacity()`, `getMaxCapacity()`, and `getDesignCapacity()`
`String`	`getChemistry()` The battery chemistry (e.g., Lithium Ion).
`int`	`getCurrentCapacity()` The current (remaining) capacity of the battery.
`int`	`getCycleCount()` The cycle count of the battery, if known.
`int`	`getDesignCapacity()` The design (original) capacity of the battery.
`String`	`getDeviceName()` Name of the power source at the device level.
`LocalDate`	`getManufactureDate()` The battery's date of manufacture.
`String`	`getManufacturer()` The name of the battery's manufacturer.
`int`	`getMaxCapacity()` The maximum capacity of the battery.
`String`	`getName()` Name of the power source at the Operating System level.
`double`	`getPowerUsageRate()` Power Usage Rate of the battery, in milliWatts (mW).
`double`	`getRemainingCapacity()` Deprecated. Use `getRemainingCapacityPercent()`
`double`	`getRemainingCapacityPercent()` Estimated remaining capacity as a fraction of max capacity.
`String`	`getSerialNumber()` The battery's serial number.
`double`	`getTemperature()` The battery's temperature, in degrees Celsius.
`double`	`getTimeRemaining()` Deprecated. Use `getTimeRemainingEstimated()`
`double`	`getTimeRemainingEstimated()` Estimated time remaining on the power source, in seconds, as reported by the operating system.
`double`	`getTimeRemainingInstant()` Estimated time remaining on the power source, in seconds, as reported by the battery.
`double`	`getVoltage()` Voltage of the battery, in Volts.
`boolean`	`isCharging()` Reports whether the battery is charging.
`boolean`	`isDischarging()` Reports whether the battery is discharging.
`boolean`	`isPowerOnLine()` Reports whether the device is plugged in to an external power source.
`boolean`	`updateAttributes()` Updates statistics on this battery.

- Method Detail
  - getName
```
String getName()
```
    Name of the power source at the Operating System level.
    
    Returns:
    
    The power source name, as reported by the operating system.
  - getDeviceName
```
String getDeviceName()
```
    Name of the power source at the device level.
    
    Returns:
    
    The power source name, as reported by the device itself.
  - getRemainingCapacity
```
@Deprecated
double getRemainingCapacity()
```
    Deprecated. Use getRemainingCapacityPercent()
    
    Estimated remaining capacity as a fraction of max capacity.
    This is an estimated/smoothed value which should correspond to the Operating System's "percent power" display, and may not directly correspond to the ratio of getCurrentCapacity() to getMaxCapacity().
    
    Returns:
    
    A value between 0.0 (fully drained) and 1.0 (fully charged)
  - getRemainingCapacityPercent
```
double getRemainingCapacityPercent()
```
    Estimated remaining capacity as a fraction of max capacity.
    This is an estimated/smoothed value which should correspond to the Operating System's "percent power" display, and may not directly correspond to the ratio of getCurrentCapacity() to getMaxCapacity().
    
    Returns:
    
    A value between 0.0 (fully drained) and 1.0 (fully charged)
  - getTimeRemaining
```
@Deprecated
double getTimeRemaining()
```
    Deprecated. Use getTimeRemainingEstimated()
    
    Estimated time remaining on the power source, in seconds, as reported by the operating system.
    This is an estimated/smoothed value which should correspond to the Operating System's "battery time remaining" display, and will react slowly to changes in power consumption.
    
    Returns:
    
    If positive, seconds remaining. If negative, -1.0 (calculating) or -2.0 (unlimited)
  - getTimeRemainingEstimated
```
double getTimeRemainingEstimated()
```
    Estimated time remaining on the power source, in seconds, as reported by the operating system.
    This is an estimated/smoothed value which should correspond to the Operating System's "battery time remaining" display, and will react slowly to changes in power consumption.
    
    Returns:
    
    If positive, seconds remaining. If negative, -1.0 (calculating) or -2.0 (unlimited)
  - getTimeRemainingInstant
```
double getTimeRemainingInstant()
```
    Estimated time remaining on the power source, in seconds, as reported by the battery. If the battery is charging, this value may represent time remaining to fully charge the battery.
    Note that this value is not very accurate on some battery systems. The value may vary widely depending on present power usage, which could be affected by disk activity and other factors. This value will often be a higher value than getTimeRemainingEstimated().
    
    Returns:
    
    Seconds remaining to fully discharge or fully charge the battery.
  - getPowerUsageRate
```
double getPowerUsageRate()
```
    Power Usage Rate of the battery, in milliWatts (mW).
    
    Returns:
    
    If positive, the charge rate. If negative, the discharge rate.
  - getVoltage
```
double getVoltage()
```
    Voltage of the battery, in Volts.
    
    Returns:
    
    the battery voltage, or -1 if unknown.
  - getAmperage
```
double getAmperage()
```
    Amperage of the battery, in milliAmperes (mA).
    
    Returns:
    
    the battery amperage. If positive, charging the battery. If negative, discharging the battery.
  - isPowerOnLine
```
boolean isPowerOnLine()
```
    Reports whether the device is plugged in to an external power source.
    
    Returns:
    
    true if plugged in, false otherwise.
  - isCharging
```
boolean isCharging()
```
    Reports whether the battery is charging.
    
    Returns:
    
    true if the battery is charging, false otherwise.
  - isDischarging
```
boolean isDischarging()
```
    Reports whether the battery is discharging.
    
    Returns:
    
    true if the battery is discharging, false otherwise.
  - getCapacityUnits
```
PowerSource.CapacityUnits getCapacityUnits()
```
    Reports =the units of getCurrentCapacity(), getMaxCapacity(), and getDesignCapacity()
    
    Returns:
    
    The units of battery capacity.
  - getCurrentCapacity
```
int getCurrentCapacity()
```
    The current (remaining) capacity of the battery.
    
    Returns:
    
    The current capacity. Units are defined by getCapacityUnits().
  - getMaxCapacity
```
int getMaxCapacity()
```
    The maximum capacity of the battery. When compared to design capacity, permits a measure of battery state of health. It is possible for max capacity to exceed design capacity.
    
    Returns:
    
    The maximum capacity. Units are defined by getCapacityUnits().
  - getDesignCapacity
```
int getDesignCapacity()
```
    The design (original) capacity of the battery. When compared to maximum capacity, permits a measure of battery state of health. It is possible for max capacity to exceed design capacity.
    
    Returns:
    
    The design capacity. Units are defined by getCapacityUnits().
  - getCycleCount
```
int getCycleCount()
```
    The cycle count of the battery, if known.
    
    Returns:
    
    The cycle count of the battery, or -1 if unknown.
  - getChemistry
```
String getChemistry()
```
    The battery chemistry (e.g., Lithium Ion).
    
    Returns:
    
    the battery chemistry.
  - getManufactureDate
```
LocalDate getManufactureDate()
```
    The battery's date of manufacture.
    Some battery manufacturers encode the manufacture date in the serial number. Parsing this value is operating system and battery manufacturer dependent, and is left to the user.
    
    Returns:
    
    the manufacture date, if available. May be null.
  - getManufacturer
```
String getManufacturer()
```
    The name of the battery's manufacturer.
    
    Returns:
    
    the manufacturer name.
  - getSerialNumber
```
String getSerialNumber()
```
    The battery's serial number.
    Some battery manufacturers encode the manufacture date in the serial number. Parsing this value is operating system and battery manufacturer dependent, and is left to the user.
    
    Returns:
    
    the serial number.
  - getTemperature
```
double getTemperature()
```
    The battery's temperature, in degrees Celsius.
    
    Returns:
    
    the battery's temperature, or 0 if uknown.
  - updateAttributes
```
boolean updateAttributes()
```
    Updates statistics on this battery.
    
    Returns:
    
    true if the update was successful. If false the battery statistics are unchanged.

Interface PowerSource

Nested Class Summary

Method Summary

Method Detail

getName

getDeviceName

getRemainingCapacity

getRemainingCapacityPercent

getTimeRemaining

getTimeRemainingEstimated

getTimeRemainingInstant

getPowerUsageRate

getVoltage

getAmperage

isPowerOnLine

isCharging

isDischarging

getCapacityUnits

getCurrentCapacity

getMaxCapacity

getDesignCapacity

getCycleCount

getChemistry

getManufactureDate

getManufacturer

getSerialNumber

getTemperature

updateAttributes