Constant Field Values

Contents

• org.apache.*

org.apache.*

org.apache.camel.kafkaconnector.avro.CamelAvroSinkConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SINK_AVRO_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.avro.autowiredEnabled"
public static final String	CAMEL_SINK_AVRO_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SINK_AVRO_COMPONENT_CONFIGURATION_CONF	"camel.component.avro.configuration"
public static final String	CAMEL_SINK_AVRO_COMPONENT_CONFIGURATION_DOC	"To use a shared AvroConfiguration to configure options once"
public static final String	CAMEL_SINK_AVRO_COMPONENT_LAZY_START_PRODUCER_CONF	"camel.component.avro.lazyStartProducer"
public static final String	CAMEL_SINK_AVRO_COMPONENT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_AVRO_COMPONENT_PROTOCOL_CLASS_NAME_CONF	"camel.component.avro.protocolClassName"
public static final String	CAMEL_SINK_AVRO_COMPONENT_PROTOCOL_CLASS_NAME_DOC	"Avro protocol to use defined by the FQN class name"
public static final String	CAMEL_SINK_AVRO_COMPONENT_PROTOCOL_CONF	"camel.component.avro.protocol"
public static final String	CAMEL_SINK_AVRO_COMPONENT_PROTOCOL_DOC	"Avro protocol to use"
public static final String	CAMEL_SINK_AVRO_COMPONENT_PROTOCOL_LOCATION_CONF	"camel.component.avro.protocolLocation"
public static final String	CAMEL_SINK_AVRO_COMPONENT_PROTOCOL_LOCATION_DOC	"Avro protocol location"
public static final String	CAMEL_SINK_AVRO_COMPONENT_REFLECTION_PROTOCOL_CONF	"camel.component.avro.reflectionProtocol"
public static final String	CAMEL_SINK_AVRO_COMPONENT_REFLECTION_PROTOCOL_DOC	"If protocol object provided is reflection protocol. Should be used only with protocol parameter because for protocolClassName protocol type will be auto detected"
public static final String	CAMEL_SINK_AVRO_COMPONENT_SINGLE_PARAMETER_CONF	"camel.component.avro.singleParameter"
public static final String	CAMEL_SINK_AVRO_COMPONENT_SINGLE_PARAMETER_DOC	"If true, consumer parameter won\'t be wrapped into array. Will fail if protocol specifies more then 1 parameter for the message"
public static final String	CAMEL_SINK_AVRO_COMPONENT_URI_AUTHORITY_CONF	"camel.component.avro.uriAuthority"
public static final String	CAMEL_SINK_AVRO_COMPONENT_URI_AUTHORITY_DOC	"Authority to use (username and password)"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_LAZY_START_PRODUCER_CONF	"camel.sink.endpoint.lazyStartProducer"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_AVRO_ENDPOINT_PROTOCOL_CLASS_NAME_CONF	"camel.sink.endpoint.protocolClassName"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_PROTOCOL_CLASS_NAME_DOC	"Avro protocol to use defined by the FQN class name"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_PROTOCOL_CONF	"camel.sink.endpoint.protocol"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_PROTOCOL_DOC	"Avro protocol to use"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_PROTOCOL_LOCATION_CONF	"camel.sink.endpoint.protocolLocation"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_PROTOCOL_LOCATION_DOC	"Avro protocol location"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_REFLECTION_PROTOCOL_CONF	"camel.sink.endpoint.reflectionProtocol"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_REFLECTION_PROTOCOL_DOC	"If protocol object provided is reflection protocol. Should be used only with protocol parameter because for protocolClassName protocol type will be auto detected"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_SINGLE_PARAMETER_CONF	"camel.sink.endpoint.singleParameter"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_SINGLE_PARAMETER_DOC	"If true, consumer parameter won\'t be wrapped into array. Will fail if protocol specifies more then 1 parameter for the message"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_URI_AUTHORITY_CONF	"camel.sink.endpoint.uriAuthority"
public static final String	CAMEL_SINK_AVRO_ENDPOINT_URI_AUTHORITY_DOC	"Authority to use (username and password)"
public static final String	CAMEL_SINK_AVRO_PATH_HOST_CONF	"camel.sink.path.host"
public static final String	CAMEL_SINK_AVRO_PATH_HOST_DOC	"Hostname to use"
public static final String	CAMEL_SINK_AVRO_PATH_MESSAGE_NAME_CONF	"camel.sink.path.messageName"
public static final String	CAMEL_SINK_AVRO_PATH_MESSAGE_NAME_DOC	"The name of the message to send."
public static final String	CAMEL_SINK_AVRO_PATH_PORT_CONF	"camel.sink.path.port"
public static final String	CAMEL_SINK_AVRO_PATH_PORT_DOC	"Port number to use"
public static final String	CAMEL_SINK_AVRO_PATH_TRANSPORT_CONF	"camel.sink.path.transport"
public static final String	CAMEL_SINK_AVRO_PATH_TRANSPORT_DOC	"Transport to use, can be either http or netty One of: [http] [netty]"

org.apache.camel.kafkaconnector.avro.CamelAvroSourceConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.avro.autowiredEnabled"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_BRIDGE_ERROR_HANDLER_CONF	"camel.component.avro.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_CONFIGURATION_CONF	"camel.component.avro.configuration"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_CONFIGURATION_DOC	"To use a shared AvroConfiguration to configure options once"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_PROTOCOL_CLASS_NAME_CONF	"camel.component.avro.protocolClassName"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_PROTOCOL_CLASS_NAME_DOC	"Avro protocol to use defined by the FQN class name"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_PROTOCOL_CONF	"camel.component.avro.protocol"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_PROTOCOL_DOC	"Avro protocol to use"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_PROTOCOL_LOCATION_CONF	"camel.component.avro.protocolLocation"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_PROTOCOL_LOCATION_DOC	"Avro protocol location"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_REFLECTION_PROTOCOL_CONF	"camel.component.avro.reflectionProtocol"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_REFLECTION_PROTOCOL_DOC	"If protocol object provided is reflection protocol. Should be used only with protocol parameter because for protocolClassName protocol type will be auto detected"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_SINGLE_PARAMETER_CONF	"camel.component.avro.singleParameter"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_SINGLE_PARAMETER_DOC	"If true, consumer parameter won\'t be wrapped into array. Will fail if protocol specifies more then 1 parameter for the message"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_URI_AUTHORITY_CONF	"camel.component.avro.uriAuthority"
public static final String	CAMEL_SOURCE_AVRO_COMPONENT_URI_AUTHORITY_DOC	"Authority to use (username and password)"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_BRIDGE_ERROR_HANDLER_CONF	"camel.source.endpoint.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_EXCEPTION_HANDLER_CONF	"camel.source.endpoint.exceptionHandler"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_EXCEPTION_HANDLER_DOC	"To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_EXCHANGE_PATTERN_CONF	"camel.source.endpoint.exchangePattern"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_EXCHANGE_PATTERN_DOC	"Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_PROTOCOL_CLASS_NAME_CONF	"camel.source.endpoint.protocolClassName"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_PROTOCOL_CLASS_NAME_DOC	"Avro protocol to use defined by the FQN class name"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_PROTOCOL_CONF	"camel.source.endpoint.protocol"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_PROTOCOL_DOC	"Avro protocol to use"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_PROTOCOL_LOCATION_CONF	"camel.source.endpoint.protocolLocation"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_PROTOCOL_LOCATION_DOC	"Avro protocol location"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_REFLECTION_PROTOCOL_CONF	"camel.source.endpoint.reflectionProtocol"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_REFLECTION_PROTOCOL_DOC	"If protocol object provided is reflection protocol. Should be used only with protocol parameter because for protocolClassName protocol type will be auto detected"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_SINGLE_PARAMETER_CONF	"camel.source.endpoint.singleParameter"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_SINGLE_PARAMETER_DOC	"If true, consumer parameter won\'t be wrapped into array. Will fail if protocol specifies more then 1 parameter for the message"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_URI_AUTHORITY_CONF	"camel.source.endpoint.uriAuthority"
public static final String	CAMEL_SOURCE_AVRO_ENDPOINT_URI_AUTHORITY_DOC	"Authority to use (username and password)"
public static final String	CAMEL_SOURCE_AVRO_PATH_HOST_CONF	"camel.source.path.host"
public static final String	CAMEL_SOURCE_AVRO_PATH_HOST_DOC	"Hostname to use"
public static final String	CAMEL_SOURCE_AVRO_PATH_MESSAGE_NAME_CONF	"camel.source.path.messageName"
public static final String	CAMEL_SOURCE_AVRO_PATH_MESSAGE_NAME_DOC	"The name of the message to send."
public static final String	CAMEL_SOURCE_AVRO_PATH_PORT_CONF	"camel.source.path.port"
public static final String	CAMEL_SOURCE_AVRO_PATH_PORT_DOC	"Port number to use"
public static final String	CAMEL_SOURCE_AVRO_PATH_TRANSPORT_CONF	"camel.source.path.transport"
public static final String	CAMEL_SOURCE_AVRO_PATH_TRANSPORT_DOC	"Transport to use, can be either http or netty One of: [http] [netty]"