Constant Field Values

Contents

• org.apache.*

org.apache.*

org.apache.camel.kafkaconnector.coap.CamelCoapSinkConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SINK_COAP_COMPONENT_BASIC_PROPERTY_BINDING_CONF	"camel.component.coap.basicPropertyBinding"
public static final String	CAMEL_SINK_COAP_COMPONENT_BASIC_PROPERTY_BINDING_DOC	"Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities"
public static final String	CAMEL_SINK_COAP_COMPONENT_LAZY_START_PRODUCER_CONF	"camel.component.coap.lazyStartProducer"
public static final String	CAMEL_SINK_COAP_COMPONENT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_COAP_ENDPOINT_ALIAS_CONF	"camel.sink.endpoint.alias"
public static final String	CAMEL_SINK_COAP_ENDPOINT_ALIAS_DOC	"Sets the alias used to query the KeyStore for the private key and certificate. This parameter is used when we are enabling TLS with certificates on the service side, and similarly on the client side when TLS is used with certificates and client authentication. If the parameter is not specified then the default behavior is to use the first alias in the keystore that contains a key entry. This configuration parameter does not apply to configuring TLS via a Raw Public Key or a Pre-Shared Key."
public static final String	CAMEL_SINK_COAP_ENDPOINT_BASIC_PROPERTY_BINDING_CONF	"camel.sink.endpoint.basicPropertyBinding"
public static final String	CAMEL_SINK_COAP_ENDPOINT_BASIC_PROPERTY_BINDING_DOC	"Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities"
public static final String	CAMEL_SINK_COAP_ENDPOINT_CIPHER_SUITES_CONF	"camel.sink.endpoint.cipherSuites"
public static final String	CAMEL_SINK_COAP_ENDPOINT_CIPHER_SUITES_DOC	"Sets the cipherSuites String. This is a comma separated String of ciphersuites to configure. If it is not specified, then it falls back to getting the ciphersuites from the sslContextParameters object."
public static final String	CAMEL_SINK_COAP_ENDPOINT_CLIENT_AUTHENTICATION_CONF	"camel.sink.endpoint.clientAuthentication"
public static final String	CAMEL_SINK_COAP_ENDPOINT_CLIENT_AUTHENTICATION_DOC	"Sets the configuration options for server-side client-authentication requirements. The value must be one of NONE, WANT, REQUIRE. If this value is not specified, then it falls back to checking the sslContextParameters.getServerParameters().getClientAuthentication() value."
public static final String	CAMEL_SINK_COAP_ENDPOINT_LAZY_START_PRODUCER_CONF	"camel.sink.endpoint.lazyStartProducer"
public static final String	CAMEL_SINK_COAP_ENDPOINT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_COAP_ENDPOINT_PRIVATE_KEY_CONF	"camel.sink.endpoint.privateKey"
public static final String	CAMEL_SINK_COAP_ENDPOINT_PRIVATE_KEY_DOC	"Set the configured private key for use with Raw Public Key."
public static final String	CAMEL_SINK_COAP_ENDPOINT_PSK_STORE_CONF	"camel.sink.endpoint.pskStore"
public static final String	CAMEL_SINK_COAP_ENDPOINT_PSK_STORE_DOC	"Set the PskStore to use for pre-shared key."
public static final String	CAMEL_SINK_COAP_ENDPOINT_PUBLIC_KEY_CONF	"camel.sink.endpoint.publicKey"
public static final String	CAMEL_SINK_COAP_ENDPOINT_PUBLIC_KEY_DOC	"Set the configured public key for use with Raw Public Key."
public static final String	CAMEL_SINK_COAP_ENDPOINT_RECOMMENDED_CIPHER_SUITES_ONLY_CONF	"camel.sink.endpoint.recommendedCipherSuitesOnly"
public static final String	CAMEL_SINK_COAP_ENDPOINT_RECOMMENDED_CIPHER_SUITES_ONLY_DOC	"The CBC cipher suites are not recommended. If you want to use them, you first need to set the recommendedCipherSuitesOnly option to false."
public static final String	CAMEL_SINK_COAP_ENDPOINT_SSL_CONTEXT_PARAMETERS_CONF	"camel.sink.endpoint.sslContextParameters"
public static final String	CAMEL_SINK_COAP_ENDPOINT_SSL_CONTEXT_PARAMETERS_DOC	"Set the SSLContextParameters object for setting up TLS. This is required for coapstcp, and for coaps when we are using certificates for TLS (as opposed to RPK or PKS)."
public static final String	CAMEL_SINK_COAP_ENDPOINT_SYNCHRONOUS_CONF	"camel.sink.endpoint.synchronous"
public static final String	CAMEL_SINK_COAP_ENDPOINT_SYNCHRONOUS_DOC	"Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported)."
public static final String	CAMEL_SINK_COAP_ENDPOINT_TRUSTED_RPK_STORE_CONF	"camel.sink.endpoint.trustedRpkStore"
public static final String	CAMEL_SINK_COAP_ENDPOINT_TRUSTED_RPK_STORE_DOC	"Set the TrustedRpkStore to use to determine trust in raw public keys."
public static final String	CAMEL_SINK_COAP_PATH_URI_CONF	"camel.sink.path.uri"
public static final String	CAMEL_SINK_COAP_PATH_URI_DOC	"The URI for the CoAP endpoint"

org.apache.camel.kafkaconnector.coap.CamelCoapSourceConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SOURCE_COAP_COMPONENT_BASIC_PROPERTY_BINDING_CONF	"camel.component.coap.basicPropertyBinding"
public static final String	CAMEL_SOURCE_COAP_COMPONENT_BASIC_PROPERTY_BINDING_DOC	"Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities"
public static final String	CAMEL_SOURCE_COAP_COMPONENT_BRIDGE_ERROR_HANDLER_CONF	"camel.component.coap.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_COAP_COMPONENT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_ALIAS_CONF	"camel.source.endpoint.alias"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_ALIAS_DOC	"Sets the alias used to query the KeyStore for the private key and certificate. This parameter is used when we are enabling TLS with certificates on the service side, and similarly on the client side when TLS is used with certificates and client authentication. If the parameter is not specified then the default behavior is to use the first alias in the keystore that contains a key entry. This configuration parameter does not apply to configuring TLS via a Raw Public Key or a Pre-Shared Key."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_BASIC_PROPERTY_BINDING_CONF	"camel.source.endpoint.basicPropertyBinding"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_BASIC_PROPERTY_BINDING_DOC	"Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_BRIDGE_ERROR_HANDLER_CONF	"camel.source.endpoint.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_CIPHER_SUITES_CONF	"camel.source.endpoint.cipherSuites"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_CIPHER_SUITES_DOC	"Sets the cipherSuites String. This is a comma separated String of ciphersuites to configure. If it is not specified, then it falls back to getting the ciphersuites from the sslContextParameters object."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_CLIENT_AUTHENTICATION_CONF	"camel.source.endpoint.clientAuthentication"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_CLIENT_AUTHENTICATION_DOC	"Sets the configuration options for server-side client-authentication requirements. The value must be one of NONE, WANT, REQUIRE. If this value is not specified, then it falls back to checking the sslContextParameters.getServerParameters().getClientAuthentication() value."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_COAP_METHOD_RESTRICT_CONF	"camel.source.endpoint.coapMethodRestrict"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_COAP_METHOD_RESTRICT_DOC	"Comma separated list of methods that the CoAP consumer will bind to. The default is to bind to all methods (DELETE, GET, POST, PUT)."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_EXCEPTION_HANDLER_CONF	"camel.source.endpoint.exceptionHandler"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_EXCEPTION_HANDLER_DOC	"To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_EXCHANGE_PATTERN_CONF	"camel.source.endpoint.exchangePattern"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_EXCHANGE_PATTERN_DOC	"Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_PRIVATE_KEY_CONF	"camel.source.endpoint.privateKey"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_PRIVATE_KEY_DOC	"Set the configured private key for use with Raw Public Key."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_PSK_STORE_CONF	"camel.source.endpoint.pskStore"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_PSK_STORE_DOC	"Set the PskStore to use for pre-shared key."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_PUBLIC_KEY_CONF	"camel.source.endpoint.publicKey"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_PUBLIC_KEY_DOC	"Set the configured public key for use with Raw Public Key."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_RECOMMENDED_CIPHER_SUITES_ONLY_CONF	"camel.source.endpoint.recommendedCipherSuitesOnly"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_RECOMMENDED_CIPHER_SUITES_ONLY_DOC	"The CBC cipher suites are not recommended. If you want to use them, you first need to set the recommendedCipherSuitesOnly option to false."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_SSL_CONTEXT_PARAMETERS_CONF	"camel.source.endpoint.sslContextParameters"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_SSL_CONTEXT_PARAMETERS_DOC	"Set the SSLContextParameters object for setting up TLS. This is required for coapstcp, and for coaps when we are using certificates for TLS (as opposed to RPK or PKS)."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_SYNCHRONOUS_CONF	"camel.source.endpoint.synchronous"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_SYNCHRONOUS_DOC	"Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported)."
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_TRUSTED_RPK_STORE_CONF	"camel.source.endpoint.trustedRpkStore"
public static final String	CAMEL_SOURCE_COAP_ENDPOINT_TRUSTED_RPK_STORE_DOC	"Set the TrustedRpkStore to use to determine trust in raw public keys."
public static final String	CAMEL_SOURCE_COAP_PATH_URI_CONF	"camel.source.path.uri"
public static final String	CAMEL_SOURCE_COAP_PATH_URI_DOC	"The URI for the CoAP endpoint"