<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
	    targetNamespace="http://java.sun.com/xml/ns/javaee"
	    xmlns:javaee="http://java.sun.com/xml/ns/javaee"
	    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
	    elementFormDefault="qualified"
	    attributeFormDefault="unqualified"
	    version="1.6">
  <xsd:annotation>
    <xsd:documentation>
      @(#)connector_1_6.xsds	1.28 07/17/08
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.

      Copyright 2003-2007 Sun Microsystems, Inc. All rights reserved.

      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.

      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"

      Contributor(s):

      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.

    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>
      <![CDATA[

	This is the XML Schema for the Connector 1.6 deployment
	descriptor.  The deployment descriptor must be named
	"META-INF/ra.xml" in the connector's rar file.  All Connector
	deployment descriptors must indicate the connector resource
	adapter schema by using the Java EE namespace:

	http://java.sun.com/xml/ns/javaee

	and by indicating the version of the schema by
	using the version element as shown below:

	    <connector xmlns="http://java.sun.com/xml/ns/javaee"
	      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	      xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
		 http://java.sun.com/xml/ns/javaee/connector_1_6.xsd"
	      version="1.6">
	      ...
	    </connector>

	The instance documents may indicate the published version of
	the schema using the xsi:schemaLocation attribute for Java EE
	namespace with the following location:

	http://java.sun.com/xml/ns/javaee/connector_1_6.xsd

	]]>
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      The following conventions apply to all Java EE
      deployment descriptor elements unless indicated otherwise.

      - In elements that specify a pathname to a file within the
	same JAR file, relative filenames (i.e., those not
	starting with "/") are considered relative to the root of
	the JAR file's namespace.  Absolute filenames (i.e., those
	starting with "/") also specify names in the root of the
	JAR file's namespace.  In general, relative names are
	preferred.  The exception is .war files where absolute
	names are preferred for consistency with the Servlet API.

    </xsd:documentation>
  </xsd:annotation>

  <xsd:include schemaLocation="javaee_5.xsd"/>


<!-- **************************************************** -->


  <xsd:element name="connector" type="javaee:connectorType">
    <xsd:annotation>
      <xsd:documentation>

	The connector element is the root element of the deployment
	descriptor for the resource adapter. This element includes
	general information - vendor name, resource adapter version,
	icon - about the resource adapter module. It also includes
	information specific to the implementation of the resource
	adapter library as specified through the element
	resourceadapter.

      </xsd:documentation>
    </xsd:annotation>

  </xsd:element>

<!-- **************************************************** -->

  <xsd:complexType name="activationspecType">
    <xsd:annotation>
      <xsd:documentation>

	The activationspecType specifies an activation
	specification.  The information includes fully qualified
	Java class name of an activation specification and a set of
	required configuration property names.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="activationspec-class"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element activationspec-class specifies the fully
	      qualified Java class name of the activation
	      specification class. This class must implement the
	      javax.resource.spi.ActivationSpec interface. The
	      implementation of this class is required to be a
	      JavaBean.

	      Example:
		  <activationspec-class>com.wombat.ActivationSpecImpl
		  </activationspec-class>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="required-config-property"
		   type="javaee:required-config-propertyType"
		   minOccurs="0"
		   maxOccurs="unbounded">
    <xsd:annotation>
      <xsd:documentation>

	The required-config-property element is deprecated since
	Connectors 1.6 specification. The resource adapter 
	implementation is recommended to use the @NotNull
	Bean Validation annotation or its XML validation
	descriptor equivalent to indicate that a configuration
	property is required to be specified by the deployer.
	See the Connectors specification for more information. 

      </xsd:documentation>
    </xsd:annotation>
		   
	   </xsd:element>
	
      <xsd:element name="config-property"
           type="javaee:config-propertyType"
           minOccurs="0"
           maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="adminobjectType">
    <xsd:annotation>
      <xsd:documentation>

	The adminobjectType specifies information about an
	administered object.  Administered objects are specific to a
	messaging style or message provider.  This contains
	information on the Java type of the interface implemented by
	an administered object, its Java class name and its
	configuration properties.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="adminobject-interface"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element adminobject-interface specifies the
	      fully qualified name of the Java type of the
	      interface implemented by an administered object.

	      Example:
		<adminobject-interface>javax.jms.Destination
		</adminobject-interface>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>

      </xsd:element>
      <xsd:element name="adminobject-class"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element adminobject-class specifies the fully
	      qualified Java class name of an administered object.

	      Example:
		  <adminobject-class>com.wombat.DestinationImpl
		  </adminobject-class>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="config-property"
		   type="javaee:config-propertyType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="authentication-mechanismType">
    <xsd:annotation>
      <xsd:documentation>

	The authentication-mechanismType specifies an authentication
	mechanism supported by the resource adapter. Note that this
	support is for the resource adapter and not for the
	underlying EIS instance. The optional description specifies
	any resource adapter specific requirement for the support of
	security contract and authentication mechanism.

	Note that BasicPassword mechanism type should support the
	javax.resource.spi.security.PasswordCredential interface.
	The Kerbv5 mechanism type should support the
	org.ietf.jgss.GSSCredential interface or the deprecated
	javax.resource.spi.security.GenericCredential interface.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="javaee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="authentication-mechanism-type"
		   type="javaee:xsdStringType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element authentication-mechanism-type specifies
	      type of an authentication mechanism.

	      The example values are:

	      <authentication-mechanism-type>BasicPassword
	      </authentication-mechanism-type>

	      <authentication-mechanism-type>Kerbv5
	      </authentication-mechanism-type>

	      Any additional security mechanisms are outside the
	      scope of the Connector architecture specification.

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>

      </xsd:element>
      <xsd:element name="credential-interface"
		   type="javaee:credential-interfaceType"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="config-property-nameType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The config-property-nameType contains the name of a
	  configuration property.

	  The connector architecture defines a set of well-defined
	  properties all of type java.lang.String. These are as
	  follows.

	       ServerName
	       PortNumber
	       UserName
	       Password
	       ConnectionURL

	  A resource adapter provider can extend this property set to
	  include properties specific to the resource adapter and its
	  underlying EIS.

	  Possible values include
		  ServerName
		  PortNumber
		  UserName
		  Password
		  ConnectionURL

	  Example: <config-property-name>ServerName</config-property-name>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:xsdStringType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="config-property-typeType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The config-property-typeType contains the fully
	  qualified Java type of a configuration property.

	  The following are the legal values:
	     java.lang.Boolean, java.lang.String, java.lang.Integer,
	     java.lang.Double, java.lang.Byte, java.lang.Short,
	     java.lang.Long, java.lang.Float, java.lang.Character

	  Used in: config-property

	  Example:
	  <config-property-type>java.lang.String</config-property-type>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
	<xsd:enumeration value="java.lang.Boolean"/>
	<xsd:enumeration value="java.lang.String"/>
	<xsd:enumeration value="java.lang.Integer"/>
	<xsd:enumeration value="java.lang.Double"/>
	<xsd:enumeration value="java.lang.Byte"/>
	<xsd:enumeration value="java.lang.Short"/>
	<xsd:enumeration value="java.lang.Long"/>
	<xsd:enumeration value="java.lang.Float"/>
	<xsd:enumeration value="java.lang.Character"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="config-propertyType">
    <xsd:annotation>
      <xsd:documentation>

	The config-propertyType contains a declaration of a single
	configuration property that may be used for providing
	configuration information.

	The declaration consists of an optional description, name,
	type and an optional value of the configuration property. If
	the resource adapter provider does not specify a value than
	the deployer is responsible for providing a valid value for
	a configuration property.

	Any bounds or well-defined values of properties should be
	described in the description element.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
		   type="javaee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="config-property-name"
		   type="javaee:config-property-nameType"/>
      <xsd:element name="config-property-type"
		   type="javaee:config-property-typeType"/>
      <xsd:element name="config-property-value"
		   type="javaee:xsdStringType"
		   minOccurs="0">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element config-property-value contains the value
	      of a configuration entry. Note, it is possible for a
	      resource adapter deployer to override this
	      configuration information during deployment.

	      Example:
	      <config-property-value>WombatServer</config-property-value>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      
	<xsd:element name="config-property-ignore" type="javaee:true-falseType"
		minOccurs="0" maxOccurs="1">
		<xsd:annotation>
			<xsd:documentation>
	    <![CDATA[

	      The element config-property-ignore is used to specify 
	      whether the configuration tools must ignore considering the 
	      configuration property during auto-discovery of
	      Configuration properties. See the Connector specification for
	      more details. If unspecified, the container must not ignore
	      the configuration property during auto-discovery.
	      This element must be one of the following, "true" or "false".
	      
	      ]]>
	  </xsd:documentation>
		</xsd:annotation>
	</xsd:element>

	<xsd:element name="config-property-supports-dynamic-updates" type="javaee:true-falseType"
		minOccurs="0" maxOccurs="1">
		<xsd:annotation>
			<xsd:documentation>
	    <![CDATA[

	      The element config-property-supports-dynamic-updates is used to specify 
	      whether the configuration property allows its value to be updated, by
	      application server's configuration tools, during the lifetime of
	      the JavaBean instance. See the Connector specification for
	      more details. If unspecified, the container must not dynamically
	      reconfigure the property.
	      This element must be one of the following, "true" or "false".
	      
	      ]]>
	  </xsd:documentation>
		</xsd:annotation>
	</xsd:element>
	
	<xsd:element name="config-property-confidential" type="javaee:true-falseType"
		minOccurs="0" maxOccurs="1">
		<xsd:annotation>
			<xsd:documentation>
	    <![CDATA[

	      The element config-property-confidential is used to specify 
	      whether the configuration property is confidential and
	      recommends application server's configuration tools to use special 
	      visual aids for editing them. See the Connector specification for
	      more details. If unspecified, the container must not treat the
	      property as confidential.
	      This element must be one of the following, "true" or "false".
	      
	      ]]>
	  </xsd:documentation>
		</xsd:annotation>
	</xsd:element>
	      
    </xsd:sequence>
    
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="connection-definitionType">
    <xsd:annotation>
      <xsd:documentation>

	The connection-definitionType defines a set of connection
	interfaces and classes pertaining to a particular connection
	type. This also includes configurable properties for
	ManagedConnectionFactory instances that may be produced out
	of this set.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="managedconnectionfactory-class"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element managedconnectionfactory-class specifies
	      the fully qualified name of the Java class that
	      implements the
	      javax.resource.spi.ManagedConnectionFactory interface.
	      This Java class is provided as part of resource
	      adapter's implementation of connector architecture
	      specified contracts. The implementation of this
	      class is required to be a JavaBean.

	      Example:
	      <managedconnectionfactory-class>
		  com.wombat.ManagedConnectionFactoryImpl
	      </managedconnectionfactory-class>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property"
		   type="javaee:config-propertyType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="connectionfactory-interface"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element connectionfactory-interface specifies
	      the fully qualified name of the ConnectionFactory
	      interface supported by the resource adapter.

	      Example:
	      <connectionfactory-interface>com.wombat.ConnectionFactory
	      </connectionfactory-interface>

	      OR

	      <connectionfactory-interface>javax.resource.cci.ConnectionFactory
	      </connectionfactory-interface>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="connectionfactory-impl-class"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element connectionfactory-impl-class specifies
	      the fully qualified name of the ConnectionFactory
	      class that implements resource adapter
	      specific ConnectionFactory interface.

	      Example:

	      <connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
	      </connectionfactory-impl-class>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="connection-interface"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The connection-interface element specifies the fully
	      qualified name of the Connection interface supported
	      by the resource adapter.

	      Example:

		  <connection-interface>javax.resource.cci.Connection
		  </connection-interface>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="connection-impl-class"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The connection-impl-classType specifies the fully
	      qualified name of the Connection class that
	      implements resource adapter specific Connection
	      interface.  It is used by the connection-impl-class
	      elements.

	      Example:

		  <connection-impl-class>com.wombat.ConnectionImpl
		  </connection-impl-class>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="connectorType">
    <xsd:annotation>
      <xsd:documentation>

	The connectorType defines a resource adapter.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="vendor-name"
		   type="javaee:xsdStringType">
	<xsd:annotation>
	  <xsd:documentation>

	    The element vendor-name specifies the name of
	    resource adapter provider vendor.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="eis-type"
		   type="javaee:xsdStringType">
	<xsd:annotation>
	  <xsd:documentation>

	    The element eis-type contains information about the
	    type of the EIS. For example, the type of an EIS can
	    be product name of EIS independent of any version
	    info.

	    This helps in identifying EIS instances that can be
	    used with this resource adapter.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="resourceadapter-version"
		   type="javaee:xsdStringType">
	<xsd:annotation>
	  <xsd:documentation>

	    The element resourceadapter-version specifies a string-based version
	    of the resource adapter from the resource adapter
	    provider.

	  </xsd:documentation>
	</xsd:annotation>

      </xsd:element>
      <xsd:element name="license"
		   type="javaee:licenseType"
		   minOccurs="0"/>
      <xsd:element name="resourceadapter"
		   type="javaee:resourceadapterType"/>
      <xsd:element name="required-work-context"
           type="javaee:fully-qualified-classType"
           minOccurs="0"
           maxOccurs="unbounded">
          <xsd:annotation>
              <xsd:documentation>
                The element required-work-context specifies a fully qualified class 
                name that implements WorkContext interface, that the resource adapter 
                requires the application server to support.
              </xsd:documentation>
          </xsd:annotation>
     </xsd:element>
    </xsd:sequence>
    
    <xsd:attribute name="version"
		   type="javaee:dewey-versionType"
		   fixed="1.6"
		   use="required">
      <xsd:annotation>
	<xsd:documentation>

	  The version indicates the version of the schema to be used by the
	  deployment tool. This element doesn't have a default, and the resource adapter 
	  developer/deployer is required to specify it. The element allows the deployment 
	  tool to choose which schema to validate the descriptor against.
	   	  
	</xsd:documentation>
      </xsd:annotation>
    </xsd:attribute>
    
	<xsd:attribute name="metadata-complete" type="xsd:boolean">
		<xsd:annotation>
			<xsd:documentation>
      The metadata-complete attribute defines whether the deployment 
      descriptor for the resource adapter module is complete, or whether
      the class files available to the module and packaged with the resource 
      adapter should be examined for annotations that specify deployment 
      information.
      
      If metadata-complete is set to "true", the deployment tool of the 
      application server must ignore any annotations that specify deployment 
      information, which might be present in the class files of the 
      application.If metadata-complete is not specified or is set to "false", 
      the deployment tool must examine the class files of the application for 
      annotations, as specified by this specification. If the 
      deployment descriptor is not included or is included but not marked 
      metadata-complete, the deployment tool will process annotations.
      
      Application servers must assume that metadata-complete is true for 
      resource adapter modules with deployment descriptor version 
      lower than 1.6.
			</xsd:documentation>
		</xsd:annotation>
	</xsd:attribute>
    
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="credential-interfaceType">
    <xsd:annotation>
      <xsd:documentation>

	The credential-interfaceType specifies the
	interface that the resource adapter implementation
	supports for the representation of the
	credentials. This element(s) that use this type,
	i.e. credential-interface,  should be used by
	application server to find out the Credential
	interface it should use as part of the security
	contract.

	The possible values are:

	javax.resource.spi.security.PasswordCredential
	org.ietf.jgss.GSSCredential
	javax.resource.spi.security.GenericCredential

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType">
	<xsd:enumeration
	     value="javax.resource.spi.security.PasswordCredential"/>
	<xsd:enumeration
	     value="org.ietf.jgss.GSSCredential"/>
	<xsd:enumeration
	     value="javax.resource.spi.security.GenericCredential"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="inbound-resourceadapterType">
    <xsd:annotation>
      <xsd:documentation>

	The inbound-resourceadapterType specifies information
	about an inbound resource adapter. This contains information
	specific to the implementation of the resource adapter
	library as specified through the messageadapter element.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="messageadapter"
		   type="javaee:messageadapterType"
		   minOccurs="0">
	<xsd:unique name="messagelistener-type-uniqueness">
	  <xsd:annotation>
	    <xsd:documentation>

	      The messagelistener-type element content must be
	      unique in the messageadapter. Several messagelisteners
	      can not use the same messagelistener-type.

	    </xsd:documentation>
	  </xsd:annotation>
	  <xsd:selector xpath="javaee:messagelistener"/>
	  <xsd:field    xpath="javaee:messagelistener-type"/>
	</xsd:unique>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="licenseType">
    <xsd:annotation>
      <xsd:documentation>

	The licenseType specifies licensing requirements for the
	resource adapter module. This type specifies whether a
	license is required to deploy and use this resource adapter,
	and an optional description of the licensing terms
	(examples: duration of license, number of connection
	restrictions). It is used by the license element.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="javaee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="license-required"
		   type="javaee:true-falseType">
	<xsd:annotation>
	  <xsd:documentation>

	    The element license-required specifies whether a
	    license is required to deploy and use the
	    resource adapter. This element must be one of
	    the following, "true" or "false".

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="messageadapterType">
    <xsd:annotation>
      <xsd:documentation>

	The messageadapterType specifies information about the
	messaging capabilities of the resource adapter. This
	contains information specific to the implementation of the
	resource adapter library as specified through the
	messagelistener element.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="messagelistener"
		   type="javaee:messagelistenerType"
		   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="messagelistenerType">
    <xsd:annotation>
      <xsd:documentation>

	The messagelistenerType specifies information about a
	specific message listener supported by the messaging
	resource adapter. It contains information on the Java type
	of the message listener interface and an activation
	specification.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="messagelistener-type"
		   type="javaee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The element messagelistener-type specifies the fully
	      qualified name of the Java type of a message
	      listener interface.

	      Example:

		<messagelistener-type>javax.jms.MessageListener
		</messagelistener-type>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>

      </xsd:element>
      <xsd:element name="activationspec"
		   type="javaee:activationspecType"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="outbound-resourceadapterType">
    <xsd:annotation>
      <xsd:documentation>

	The outbound-resourceadapterType specifies information about
	an outbound resource adapter. The information includes fully
	qualified names of classes/interfaces required as part of
	the connector architecture specified contracts for
	connection management, level of transaction support
	provided, one or more authentication mechanisms supported
	and additional required security permissions.

	If there is no authentication-mechanism specified as part of
	resource adapter element then the resource adapter does not
	support any standard security authentication mechanisms as
	part of security contract. The application server ignores
	the security part of the system contracts in this case.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="connection-definition"
		   type="javaee:connection-definitionType"
		   maxOccurs="unbounded"/>
      <xsd:element name="transaction-support"
		   type="javaee:transaction-supportType"/>
      <xsd:element name="authentication-mechanism"
		   type="javaee:authentication-mechanismType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="reauthentication-support"
		   type="javaee:true-falseType">
	<xsd:annotation>
	  <xsd:documentation>

	    The element reauthentication-support specifies
	    whether the resource adapter implementation supports
	    re-authentication of existing Managed- Connection
	    instance. Note that this information is for the
	    resource adapter implementation and not for the
	    underlying EIS instance. This element must have
	    either a "true" or "false" value.

	  </xsd:documentation>
	</xsd:annotation>

      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="required-config-propertyType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The required-config-propertyType contains a declaration
	  of a single configuration property used for specifying a
	  required configuration property name. It is used
	  by required-config-property elements.
	  
	  Usage of this type is deprecated from Connectors 1.6 specification. 
	  Refer to required-config-property element for more information.
	  
	  Example:

	  <required-config-property>Destination</required-config-property>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="javaee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="config-property-name"
		   type="javaee:config-property-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="resourceadapterType">
    <xsd:annotation>
      <xsd:documentation>

	The resourceadapterType specifies information about the
	resource adapter. The information includes fully qualified
	resource adapter Java class name, configuration properties,
	information specific to the implementation of the resource
	adapter library as specified through the
	outbound-resourceadapter and inbound-resourceadapter
	elements, and an optional set of administered objects.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="resourceadapter-class"
		   type="javaee:fully-qualified-classType"
		   minOccurs="0">
	<xsd:annotation>
	  <xsd:documentation>

	    The element resourceadapter-class specifies the
	    fully qualified name of a Java class that implements
	    the javax.resource.spi.ResourceAdapter
	    interface. This Java class is provided as part of
	    resource adapter's implementation of connector
	    architecture specified contracts. The implementation
	    of this class is required to be a JavaBean.

	  </xsd:documentation>
	</xsd:annotation>

      </xsd:element>
      <xsd:element name="config-property"
		   type="javaee:config-propertyType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="outbound-resourceadapter"
		   type="javaee:outbound-resourceadapterType"
		   minOccurs="0">
	<xsd:unique name="connectionfactory-interface-uniqueness">
	  <xsd:annotation>
	    <xsd:documentation>

	      The connectionfactory-interface element content
	      must be unique in the outbound-resourceadapter.
	      Multiple connection-definitions can not use the
	      same connectionfactory-type.

	    </xsd:documentation>
	  </xsd:annotation>
	  <xsd:selector xpath="javaee:connection-definition"/>
	  <xsd:field    xpath="javaee:connectionfactory-interface"/>
	</xsd:unique>
      </xsd:element>
      <xsd:element name="inbound-resourceadapter"
		   type="javaee:inbound-resourceadapterType"
		   minOccurs="0"/>
      <xsd:element name="adminobject"
		   type="javaee:adminobjectType"
		   minOccurs="0"
		   maxOccurs="unbounded">
      <xsd:unique name="adminobject-type-uniqueness">
           <xsd:annotation>
                <xsd:documentation>
                The adminobject-interface and adminobject-class element content must be
                unique in the resourceadapterType. Several admin objects
                can not use the same adminobject-interface and adminobject-class.
                </xsd:documentation>
           </xsd:annotation>
           <xsd:selector xpath="javaee:adminobject"/>
           <xsd:field    xpath="javaee:adminobject-interface"/>
           <xsd:field    xpath="javaee:adminobject-class"/>
      </xsd:unique>
      </xsd:element>
      <xsd:element name="security-permission"
		   type="javaee:security-permissionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="security-permissionType">
    <xsd:annotation>
      <xsd:documentation>

	The security-permissionType specifies a security
	permission that is required by the resource adapter code.

	The security permission listed in the deployment descriptor
	are ones that are different from those required by the
	default permission set as specified in the connector
	specification. The optional description can mention specific
	reason that resource adapter requires a given security
	permission.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="javaee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="security-permission-spec"
		   type="javaee:xsdStringType">
	<xsd:annotation>
	  <xsd:documentation>

	    The element security-permission-spec specifies a security
	    permission based on the Security policy file
	    syntax. Refer to the following URL for Sun's
	    implementation of the security permission
	    specification:

	    http://java.sun.com/products/jdk/1.4/docs/guide/security/PolicyFiles.html#FileSyntax
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="transaction-supportType">
    <xsd:annotation>
      <xsd:documentation>

	The transaction-supportType specifies the level of
	transaction support provided by the resource adapter. It is
	used by transaction-support elements.

	The value must be one of the following:

	    NoTransaction
	    LocalTransaction
	    XATransaction

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
	<xsd:enumeration value="NoTransaction"/>
	<xsd:enumeration value="LocalTransaction"/>
	<xsd:enumeration value="XATransaction"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

</xsd:schema>

