<!--
  DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
 
  Copyright 2009 Sun Microsystems, Inc. All rights reserved.
  
  Use is subject to License Terms
--> 

<!ENTITY % boolean "(yes | no | on | off | 1 | 0 | true | false)">
<!ENTITY % severity "(FINEST|FINER|FINE|CONFIG|INFO|WARNING|SEVERE|ALERT|FATAL)">

<!-- iAS Application client container configuration 
    send-password   Specifies whether client authentication credentials should 
                    be sent to the server. Without credential all accesses to 
                    protected EJBs will result in exceptions.
   message-security-config: Optional list of layer specific lists of
     configured message security providers.
-->
<!ELEMENT client-container (target-server, auth-realm?, client-credential?, log-service?, message-security-config*, property*)>
<!ATTLIST client-container send-password %boolean; "true"> 

<!-- Target server's IIOP listener configuration 
    name        Application server instance name 
    address     ip address or hostname (resolvable by DNS) of the ORB
    port        port number of the ORB
-->
<!ELEMENT target-server (description?, security?)>
<!ATTLIST target-server name             CDATA     #REQUIRED
                        address          CDATA     #REQUIRED
                        port             CDATA     #REQUIRED>
                                                  
<!ELEMENT description (#PCDATA)>

<!-- Default client credentials that will be sent to server. If this element 
     is present, then it will be automatically sent to the server, without
     prompting the user for usename and password on the client side. 
     user-name  User name credential   
     password   Password credential
     realm      The realm (specified by name) where credentials are to be 
                resolved.
 -->
<!ELEMENT client-credential (property*)>
<!ATTLIST client-credential user-name CDATA   #REQUIRED
                            password  CDATA   #REQUIRED
                            realm     CDATA   #IMPLIED>
                                
<!-- Logging service configuration. 

     file   By default log file will be at $APPCLIENT_ROOT/logs/client.log
            Can use this attribute to specify an alternate location.
     level  sets the base level of severity. Messages at or above this 
            setting get logged into the log file.
 -->
<!ELEMENT log-service (property*)>
<!ATTLIST log-service  file                      CDATA      #IMPLIED
                       level                     %severity; "SEVERE">

<!-- SSL security  configuration for IIOP/SSL communication with 
     the target-server.
 -->
<!ELEMENT security (ssl, cert-db)>

<!-- Define SSL processing parameters

     cert-nickname nickname of the server certificate in the certificate database 
                   or the PKCS#11 token. In the certificate, the name format is
                   tokenname:nickname. Including the tokenname: part of the name 
                   in this attribute is optional. 

     ssl2-enabled  (optional) Determines whether SSL2 is enabled. 

     ssl3-enabled  (optional) Determines whether SSL3 is enabled. 

                   If both SSL2 and SSL3 are enabled for a virtual server, the server 
                   tries SSL3 encryption first. If that fails, the server tries SSL2
                   encryption. 

    ssl2ciphers    (optional) A space-separated list of the SSL2 ciphers used, with 
                   the prefix + to enable or - to disable, for example +rc4. Allowed 
                   values are rc4, rc4export, rc2, rc2export, idea, des, desede3. 

    ssl3-tls-ciphers (optional) A space-separated list of the SSL3 ciphers used, with 
                     the prefix + to enable or - to disable, for example +rsa_des_sha.
                     Allowed SSL3 values are rsa_rc4_128_md5, rsa3des_sha, rsa_des_sha, 
                     rsa_rc4_40_md5, rsa_rc2_40_md5, rsa_null_md5. Allowed TLS values 
                     are rsa_des_56_sha, rsa_rc4_56_sha. 

    tls-enabled     (optional) Determines whether TLS is enabled. 

    tls-rollback-enabled  (optional) Determines whether TLS rollback is enabled. TLS 
                          rollback should be enabled for Microsoft Internet Explorer 
                          5.0 and 5.5. 

    client-auth-enabled   (optional) Determines whether SSL3 client authentication is 
                          performed on every request, independent of ACL-based access 
                          control.
--> 
<!ELEMENT ssl EMPTY>
<!ATTLIST ssl cert-nickname        CDATA    #IMPLIED
              ssl2-enabled         CDATA    "false"
              ssl2-ciphers         CDATA    #IMPLIED
              ssl3-enabled         CDATA    "true"
              ssl3-tls-ciphers     CDATA    #IMPLIED
              tls-enabled          CDATA    "true"
              tls-rollback-enabled CDATA    "true">

<!-- Location and password to read the Certificate Database. iAS
     (actually NSS) will provide utilities with which a certificate 
     database can be created.

     path     Specifies the absolute path where the cert database (cert7.db) 
              is stored. 
     password needed to open and read a cert database
 -->
<!ELEMENT cert-db EMPTY>
<!ATTLIST cert-db path       CDATA #REQUIRED
                  password   CDATA #REQUIRED>

<!-- JAAS is available on Application Client Container. 
     Optional configuration for JAAS authentication realm.
     
     name       defines the name of this realm
     classname  defines the java class which implements this realm
 -->
<!ELEMENT auth-realm (property*)>
<!ATTLIST auth-realm name            CDATA   #REQUIRED
                     classname       CDATA   #REQUIRED>
               
<!-- Syntax for supplying properties as name value pairs -->
<!ELEMENT property EMPTY>
<!ATTLIST property name  CDATA  #REQUIRED
                   value CDATA  #REQUIRED>

<!--
The message-layer entity is used to define the value of the
auth-layer attribute of message-security-config elements.

Used in: message-security-config
-->
<!ENTITY % message-layer    "(SOAP)">

<!--
The message-security-config element defines the message layer
specific provider configurations of the application server.

All of the providers within a message-security-config element
must be able to perform authentication processing at
the message layer defined by the value of the auth-layer 
attribute. 

The default-provider attribute may be used to identify 
the server provider to be invoked for any application 
for which a specific server provider has not been bound.

The default-client-provider attribute may be used to identify 
the client provider to be invoked for any application 
for which a specific client provider has not been bound.

At most one (non-null) default server provider and at most one
(non-null) default client provider may be identified 
among all the same layer message-security-config elements. 

When a default provider of a type is not defined for a message 
layer, the container will only invoke a provider of the type
(at the layer) for those applications for which a specific
provider has been bound.

Default: 
Used in: security-service
-->
<!ELEMENT message-security-config ( provider-config+ )>
<!ATTLIST message-security-config 
          auth-layer %message-layer; #REQUIRED
	  default-provider        CDATA #IMPLIED
	  default-client-provider CDATA #IMPLIED>

<!--
The provider-config element defines the configuration of
an authentication provider.

The provider-id attibute contains an identifier that can be used to
reference the provider-config.

The request-policy and response-policy sub-elements define
the authentication policy requirements associated 
with the request and response processing performed by the
authentication provider (respectively).

the provider-type attribute defines whether the provider is a client
authentication provider or a server authentication provider.

The class-name attribute defines the java implementation class of the 
provider. Client authentication providers must implement the 
com.sun.enterprise.security.jauth.ClientAuthModule interface. Server-side
providers must implement the com.sun.enterprise.security.jauth.ServerAuthModule
interface. A provider may implement both interfaces, but it must implement
the interface corresponding to its provider type.

The optional list of property elements may be used to configure provider
specific property values. These values will be passed to the provider
when its initialize method is called.

A provider-config with no contained request-policy or response-policy
sub-elements, is a null provider. The container will not instantiate
or invoke the methods of a null provider, and as such the implementation
class of a null provider need not exist.

Default: 
Used in: message-security-config
-->
<!ELEMENT provider-config ( request-policy?, response-policy?, property* )>
<!ATTLIST provider-config
          provider-id CDATA                   #REQUIRED
	  provider-type  (client | server | client-server) #REQUIRED
          class-name      CDATA            #REQUIRED>

<!--
The request-policy element is used to define the authentication policy 
requirements associated with the request processing performed by an 
authentication provider (i.e. when a client provider's 
ClientAuthModule.initiateRequest method is called or when a
server provider's ServerAuthModule.validateRequest is called).

The auth-source attribute defines a requirement for message layer
sender authentication (e.g. username password) or content authentication 
(e.g. digital signature).

The auth-recipient attribute defines a requirement for message
layer authentication of the reciever of a message to its sender (e.g. by 
XML encryption).

The before-content attribute value indicates that recipient
authentication (e.g. encryption) is to occur before any 
content authentication (e.g. encrypt then sign) with respect
to the target of the containing auth-policy.

Default: 
Used in: provider-config
-->
<!ELEMENT request-policy EMPTY >
<!ATTLIST request-policy 
          auth-source (sender | content) #IMPLIED
	  auth-recipient (before-content | after-content) #IMPLIED>
<!--
The response-policy element is used to define the authentication policy 
requirements associated with the response processing performed by an 
authentication provider (i.e. when a client provider's 
ClientAuthModule.validateResponse method is called or when a
server provider's ServerAuthModule.secureResponse method is called).

The auth-source attribute defines a requirement for message layer
sender authentication (e.g. username password) or content authentication 
(e.g. digital signature).

The auth-recipient attribute defines a requirement for message
layer authentication of the reciever of a message to its sender (e.g. by 
XML encryption).

The before-content attribute value indicates that recipient
authentication (e.g. encryption) is to occur before any 
content authentication (e.g. encrypt then sign) with respect
to the target of the containing auth-policy.

Default: 
Used in: provider-config
-->
<!ELEMENT response-policy EMPTY >
<!ATTLIST response-policy 
          auth-source (sender | content) #IMPLIED
	  auth-recipient (before-content | after-content) #IMPLIED>

