<?xml version="1.0" encoding="UTF-8"?>
<!--

DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.

Copyright 2000-2009 Sun Microsystems, Inc. All rights reserved.

The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common Development
and Distribution License ("CDDL") (collectively, the "License").  You may
not use this file except in compliance with the License.  You can obtain
a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
or mq/legal/LICENSE.txt.  See the License for the specific language
governing permissions and limitations under the License.

When distributing the software, include this License Header Notice in each
file and include the License file at mq/legal/LICENSE.txt.  Sun designates
this particular file as subject to the "Classpath" exception as provided by
Sun in the GPL Version 2 section of the License file that accompanied this
code.  If applicable, add the following below the License Header, with the
fields enclosed by brackets [] replaced by your own identifying information:
"Portions Copyrighted [year] [name of copyright owner]"

Contributor(s):

If you wish your version of this file to be governed by only the CDDL or
only the GPL Version 2, indicate your decision by adding "[Contributor]
elects to include this software in this distribution under the [CDDL or GPL
Version 2] license."  If you don't indicate a single choice of license, a
recipient has the option to distribute your version of this file under
either the CDDL, the GPL Version 2 or  to extend the choice of license to
its licensees as provided above.  However, if you add GPL Version 2 code
and therefore, elected the GPL Version 2 license, then the option applies
only if the new code is made subject to such option by the copyright holder.

-->

<!--
A JMS bridge configuration instance document is validated against this DTD.
-->

<!-- jmsbridge 
     Top level element
     attribute:
     name - unique identifier for the bridge
    
-->
<!ELEMENT jmsbridge (link*,
                     dmq*,
                     connection-factory*,
                     destination*)>
<!ATTLIST jmsbridge name CDATA #REQUIRED
>

<!-- link
     attributes: 

     name - Unique identifier for the link
     enabled - When set to "false", the link will not be started

     transacted
         When set to "true", source and target connection factory
         object must be a type of XAConnectionFactory, otherwise 
         must be a type of ConnectionFactory
             
-->
<!ELEMENT link (description?, source, target)>
<!ATTLIST link name CDATA #REQUIRED 
               enabled (true | false) "true"
               transacted (true | false) "true"
>

<!-- source
     attributes:

     connection-factory-ref - Reference to a connection-factory element
     destination-ref - Reference to destination element
     selector - JMS selector for message consumer
     durable-sub - JMS durable subscription name
     clientid - JMS client identifier for message consumer connection 

-->
<!ELEMENT source (description?)>
<!ATTLIST source 
  connection-factory-ref CDATA #REQUIRED
  destination-ref CDATA #REQUIRED
  selector CDATA #IMPLIED 
  durable-sub CDATA #IMPLIED 
  clientid CDATA #IMPLIED 
>

<!-- target
     The property element(s), if any, will be passed to the message-transformer-class

     attributes:

     connection-factory-ref - Reference to a connection-factory element

     destination-ref
         Reference to a destination element or "AS_SOURCE"
         When set to "AS_SOURCE", the target destination name and type by
         default will be the same as that of the source message's 
         javax.jms.Message.getJMSDestination() unless it's overrided
         by MessageTransformer.branchTo() when message-transformer-class
         is specified

     stay-connected
         When set to "true", the message producer connection will
         stay connected and be dedicated.

     clientid
         JMS client identifier for message producer connection
         (if set use dedicated connection)

     retain-replyto - Whether retain JMSReplyTo header of source message 

     message-transformer-class
         The fully qualified class name of subclass of
         com.sun.messaging.bridge.service.MessageTransformer 

     consume-no-transfer-on-transform-error
         When set to "true", on MessageTransformer.transform() error (throws
         java.lang.Throwable or return null), send the message to DMQ, then
         consume the message from the source and no transfer to target;

         When set to "false", on MessageTransformer.transform() error, the 
         link will be stopped and the message is neither consumed from the 
         source nor transfered to the target
   
-->
<!ELEMENT target (description?, property*)>
<!ATTLIST target 
  connection-factory-ref CDATA #REQUIRED
  destination-ref CDATA #REQUIRED
  stay-connected (true | false) "true"
  clientid CDATA #IMPLIED
  retain-replyto (true | false) "false"
  message-transformer-class CDATA #IMPLIED
  consume-no-transfer-on-transform-error (true | false) "false"
> 

<!--
The dmq element specifies additional places, other than the built-in
dmq, where undeliverable indoubt messages to be sent.  If multiple dmq elements
specified, each will be tried,  in the order it appears in the jmsbridge 
configuration XML document instance of this DTD, to delivery a undeliverable
indoubt message until one succeeds

The property element(s), if any, will be passed to the message-transformer-class

    attributes:

    name - Unique identifier for this dmq
    enabled - If this dmq is enabled
    connection-factory-ref - Reference to a non-XA connection-factory element
    destination-ref - Reference to destination element

    stay-connected - 
        When set to "true", the message producer connection will
        stay connected and be dedicated.

    time-to-live-in-millis 
        Time-to-live in milliseconds (0 means forever) for messages
        going to this dmq 

    clientid 
        JMS client identifier for the dmq connection 
        (if set, use dedicated connection)

    send-attempts
        The number of attempts in sending a undeliverable indoubt
        message to a dmq 

    send-attempt-interval-in-seconds 
        How long to wait before next retry in sending to dmq

    message-transformer-class 
        The fully qualified subclass name of 
        com.sun.messaging.bridge.service.MessageTransformer
                                      
-->
<!ELEMENT dmq (description?, property*)>
<!ATTLIST dmq 
  name CDATA #REQUIRED  
  enabled (true | false) "true"  
  connection-factory-ref CDATA #REQUIRED
  destination-ref CDATA #REQUIRED
  stay-connected (true | false) "true"
  time-to-live-in-millis CDATA "0" 
  clientid CDATA #IMPLIED
  send-attempts CDATA "3" 
  send-attempt-interval-in-seconds CDATA "5"
  message-transformer-class CDATA #IMPLIED
>

<!--
The connection-factory element specifies a ConnectionFactory or 
a XAConnectionFactory for creating JMS Connections.  The ref-name 
specifies a reference name which can be used in another element to 
reference it.  If lookup-name is specified, the connection factory 
object will be looked up in a repository via JNDI and the required 
JNDI environment properties must be specified in property elements.
If no lookup-name is specified, a default MQ connection factory 
to the MQ broker with properties in property elements will be created.

    attributes:

    ref-name - Reference name for this element
    lookup-name - JNDI lookup name for the connection factory 

    multi-rm 
        Ignored if javax.jms.ConnectionFactory type;
        Set to "true" if the XAConnectionFactory can create connections
        to more than one XA resource managers (ie. XAResource.isSameRM 
        false among them);
        If set to "true", add separate connection-factory element for 
        each possible distinct resource manager

    connect-attempts
        The number of connect attempts (-1 means attempts forever)

    connect-attempt-interval-in-seconds
        The number of seconds to wait before each connect attempt

    idle-timeout-in-seconds
        Close a connection if it is idle for more than this long. 
        0 means no idle tmeout.

-->
<!ELEMENT connection-factory (description?, property*)>
<!ATTLIST connection-factory
 ref-name CDATA #REQUIRED 
 lookup-name CDATA #IMPLIED
 multi-rm (true | false) "false"
 connect-attempts CDATA "-1" 
 connect-attempt-interval-in-seconds CDATA "5"
 idle-timeout-in-seconds CDATA "1800"
>

<!--
The destination element specifies a JMS Destination for 
consuming or producing messages.  The ref-name specifies 
a reference name which canbe used in another element to 
reference it.   Either name or lookup-name must be specified.
If lookup-name is specified, the name and type attributes
will be ignored, and the Destination object will be looked 
up in a repository via JNDI and the required JNDI environment 
properties must be specified in property elements. If lookup-name
is not specified, a default javax.jms.Destination object with 
destination name as the name attribute and type as the type
attribute will be created at runtime. 

    attributes: 

    ref-name - Reference name for this element
    name - JMS destination name
    type - JMS destination Type
    lookup-name - JNDI lookup name for the destination
  
-->
<!ELEMENT destination (description?, property*)> 
<!ATTLIST destination
 ref-name CDATA #REQUIRED
 name CDATA #IMPLIED
 type (queue | topic) #IMPLIED
 lookup-name CDATA #IMPLIED
>

<!ELEMENT property EMPTY>
<!ATTLIST property name CDATA #REQUIRED 
                   value CDATA #REQUIRED >

<!ELEMENT description (#PCDATA)>

